Thank you for the webinar link. Awesome awesome!

Hi Mark,ZZ gurus are currently working on it. For now, everything with your import is normal. At a later date, all items imported from PlanSwift will include all the formulas as well.

@ChasstanThank you for your questions and insights. Being a heavy user of PlanSwift and having the options of “Material”, “Labor”, “Equipment” “Subcontract” & “Other” straight from the “Reports Lay...

Due to the time difference, we may not be able to attend the session live. Please ensure that the replay is available so we can review it afterward.

Good morning, G'day, G'evening ZZ Team,Hope you’re all doing great! I just wanted to say a big thanks for all the effort you’ve been putting in, it’s genuinely appreciated.I know there’s a lot happ...

Unfortunately, some of us will have to miss out. Would have loved to participate but unfortunately it is at 2:00am - 2:45am, Friday, October 31, Brisbane. Australian time. Need to saddle for the re...

@Todd Kaberline,I hope I my answer your question, but may not work for everyoneI've done some resources in the past due to teary eyes I used to have When Dark Mode Helps Low-light environments:If y...

Thank you @Gordan for joining the conversation. Just to clarify, this is an open forum where everyone is welcome to contribute and every input counts. Feel free to share your thoughts, and please b...

Hi Kyle,That’s actually a great question — and not at all naive.You’re absolutely right that integrating takeoff and estimating (so quantities automatically flow into cost items, rate libraries, ma...

Hi Heber,Imperial VLF for columns and drilled piers for a default takeoff item and Metrick VLM for columns and drilled piers

Awesome Idea and request as well.

I would gladly do it for you mate, but I haven't learned how to export yet. If somebody can help from ZZ?

Noted with thanks.

Hi Hebber,While a storage allocation of 10 GB is considered moderate, increasing the capacity to 15 GB would be significantly more advantageous. This additional space would provide greater flexibil...

Hi Heber,As of not taking too much notice at the time and I should mention, only happened once in the last 2 month, but following Joe’s mention of his issue, I felt it was important to report it fo...

Hi James!Is it possible to perform this action entirely using either the mouse (for clicking, cutting, and pasting) or keyboard shortcuts?It is advantageous to support both mouse and keyboard metho...

Hello Heber!I want to share this post with the aim of helping, not confusing. My goal is to provide useful insights and clear guidance, so I hope it brings value and understanding rather than uncer...

Thank you, Todd,I realize that I need to start a new one. I done it few times before I asked, but didn't wanted to tell you, 😂 Take care an keep up the good work you doing, cheers!

Hi Todd,Awesome Video Tutorial, thank you so much.I have a question bellow the attachment: Is there a way to also edit inside the "Name" the word contents e.g. (500R-Bar Size ⌀) after the "<--- Edi...

Hi @Sam, Pile Depth ValuesPile depth values are determined through a combination of engineering recommendations and the results obtained from geotechnical reports. In certain situations, it is poss...

Hi again, Todd,Here it is, completed. I have attached it for everyone to review and learn from, as I did. I would like to mention that these are the production rates per Vertical linear meter I use...

Hi again, Todd,Thanks to your help, I was able to make it work. I removed the multiplication sign (*) between "if" and "Diameter," and added a '0' after 0.1563 and now it looks like this. I’ll cont...

Thank you, Todd!Unfortunately, it appears to not be working. The red triangle with an exclamation mark on the last row highlights the problem. Have a good night’s sleep, Todd. I’m confident you’ll ...

This option is awesome.

The formula is currently set to display CU M. Additionally, I need it to show the total VLF or VLM under the Length column. It would be ideal if the formula displays either VLF or VLM depending on ...